4. Close and lock the battery/memory card compartment.
Inserting an SD/SDHC/SDXC Memory Card
Expand your camera’s storage by using SD, SDHC or SDXC memory cards.
1.Unlock and open the Battery/memory card compartment at the bottom of the camera.
2.Insert the SD/SDHC/SDXC card into the memory card slot with the metallic part facing the back side of the camera.
3.Push the SD/SDHC/SDXC card into the memory slot until it clicks into place.
4.Close and lock the Battery/memory card compartment.
To remove the SD/SDHC/SDXC card
1.Unlock and open the battery/memory card compartment.
2.Gently push the card until it pops out.
3.Pull out the card carefully.
Windows 2000/XP are not support SDXC card (exFAT format). But in Windows XP (Service Pack 2 or 3 do), you can download exFAT patch update to support SDXC card.
Charging the Battery by USB
In other way charging the battery, you can use the USB cable to connect the camera with PC or USB adapter.
1.Connect the camera with the USB cable as shown.
2.Connect the other end with the USB adapter and plug it into a power outlet or with the USB port of PC directly for charging.
•When the battery is charging, the LED indicator flashes.
•When the battery is fully charged, the LED indicator turns off.
•If the battery is defective or unable to charge properly, the LED indicator flashes rapidly.
•When the camera charges without the battery inside, the LED indicator turns off.
•It's recommended not to operate the camera when charging.
Actual charging time depends on current battery capacity and charging conditions.
11
