HP t5710 manual ThinState Capture

Control Panel extended selections

For detailed information, please review the “Using the HP DHCP

Settings Update Client” document on the HP support site at:

http://welcome.hp.com/country/us/en/support.html.

ThinState Capture

The HP ThinState Capture tool is a very simple wizard-based tool that you can use to capture an HP thin client XP Embedded image, which you can then deploy to another HP thin client of identical model and hardware.

What do you need to have?

■An HP thin client XP embedded unit that contains the latest HP provided image.

■An HP approved USB drive key. Consult the

t5720 quick specs for the latest approved USB flash drives.

ÅWARNING: By default, the First Boot Device in the F10 System Bios is first set to USB, then ATA Flash, and finally to Network boot. If the default Boot order settings have been changed, it is critical before using the ThinState Capture tool that you first set the First Boot Device in the Advanced Bios Features section of the F10 System Bios to USB.

✎

✎

The HP ThinState Capture tool is not a standalone tool and can only be accessed by the administrator from within the thin client image.

Save all data on the USB flash drive prior to performing this procedure.

Quick Reference Guide www.hp.com 4-9