PAPER QUALITY GUIDELINES

General

These paper quality guidelines are general recommendations. Paper beyond these specifications may work as well, however it should be tested before use. Paper is a material that reacts intensively to adverse temperature and humidity conditions. The observance of proper conditions as defined below is therefore essential for trouble-free operation of TowerFeed. Please also refer to the corresponding guidelines in the printer manual.

Paper Quality and Surface

Bond type papers and papers with slight rag content are recommended. For papers with high rag content, as well as very light and air mail papers, feeding tests must be conducted to check for satisfactory performance before regular use. Paper with embossed or heavy printing should be tested in TowerFeed before use, as well. Papers with glossy or structured surface are not recommended. Individual sheets in a stack must not be damaged, warped more than 3 mm (0. 12") at an angle of max. 20° or creased, since all these may reduce the feeding performance.

Paper Weight

60 - 95 g / m2 (16 - 24 lb.). Other paper weights must be tested before use.

Tolerance

Paper must be cut to the appropriate size dimension within a tolerance of +/- 1.0 mm (+/- 0.04"). The paper stack must be cut square to within a tolerance of 90° +/- 0.1°.

Recommended Storage Environment

Temperature:

18°C - 24°C (64°F - 75°F)

Relative humidity: 40% - 60%

IU 661 / 0047

14

TowerFeedTM for the HP LaserJet 8150/8100/8000

 

 

 

Page 16
Image 16
HP TOWERFEED 8000, TOWERFEED 8150 manual Paper Quality Guidelines