Removal and Replacement Procedures

7.Remove the 2 Phillips PM2.0×4.0 screws 1 that secure the USB board to the frame.

8.Remove the 2 Phillips PM2.5×8.0 screws 2 that secure the USB board to the frame.

9.Lift the rear edge of the USB board 3 until it disengages from the frame.

10.Slide the frame away 4 and remove it.

Removing the USB Board

Reverse the above procedure to install the USB board.

5–86

Maintenance and Service Guide

Page 192
Image 192
HP V4376EA, V4201XX, V4200, V4000T, V4209TU, V4203XX, V4322EA, V4354EA manual Reverse the above procedure to install the USB board