3.Click Enable button to activate the application. The application starts or resumes operation and the application state is changed to ACTIVE.
3.6.6Uninstalling an application
This procedure completely removes an application from the controller. To later restore the removed application, see Adding or upgrading an application.
Use the following procedure to uninstall an application using the UI.
1.In the Applications screen, select the application you want to uninstall.
2.Click Uninstall.
3.Click the Uninstall button to remove (delete) the application.
3.7Configurations screen
The Configurations screen enables access to the configurable components in the controller.
3.7.1 About the configurable components
The configuration components are used to manage the controller and application features. The base set of controller components support the applications that are embedded in the controller. Adding or removing an SDN application might add or remove additional configuration component. However, direct addition or removal of configuration components is not supported.
Each configuration component contains one or more component keys, each of which identify a configurable property of the component.
CAUTION: Inappropriate changes to key values can result in severely degraded system performance. For this reason, HP strongly recommends that managing the default key values be done only by experienced network administrators and programmers who have a strong understanding of SDN controller systems.
3.7 Configurations screen 25