HP VLI 8 CD-ROM, Advanced, Disabled, the accessory board, 9 Replace the cover (described in this chapter), •WOL (Wake on LAN) connector to the Network board

2How to Install and Replace Components In Your Desktop PC Installing Accessory Boards

8The accessory board may need a special connection, such as:•WOL (Wake on LAN) connector to the Network board.

•CD-ROM drive to the sound board (if you no longer want to use the integrated audio).

Integrated Audio Connector
If you install an add-on sound
board, remove the cable in this
connector and insert it into the	WOL Connector
sound board’s connector.

	For more information, refer to the documentation that came with
	the accessory board. The necessary cables are usually provided with
	the accessory board.
NOTE	If you install a network board and connect it to the WOL connector, you
	must enable the Suspend Wake-Up/Integrated Network and/or
	Integrated Network fields in the Power menu of the PC’s Setup
	program. This only applies if the network board supports these modes.
	To enter the Setup program, press F2 during startup.
	If you install an add-on sound board (and you no longer want to use the
	integrated audio), you must set the Integrated Audio Interface in
	the Advanced menu of the Setup program to Disabled.
	9 Replace the cover (described in this chapter).

68