Manuals
/
Brands
/
Computer Equipment
/
Computer Hardware
/
HP
/
Computer Equipment
/
Computer Hardware
HP
VLI 8 manual
36
1
36
36
Download
36 pages, 1.04 Mb
2
How to Install and Replace Components In Your Desktop PC Installing a Security Cable
78
Contents
Models and Accessories
Note
Supported Accessories
Page
System Board, BIOS, and Memory
System Board Switches
BIOS History
Part Numbers
Page
Page
Removing and Replacing the Cover
Removing the Cover
Replacing the Cover
The Label Inside Your PC
Upgrading the Main Memory
Upgrading and Installing Mass Storage Devices
Drive Connectors
Which Data Connectors to Use
Before Installing an IDE Hard Disk
There are three data cables inside your PC. Two of these are for IDE devices
An Enhanced Ultra ATA IDE (Integrated Drive Electronics) hard disk drive cable
A second IDE drive cable that supports two IDE devices. If you install a
Upgrading the Hard Disk Drive
6Replace the drive tray ➊ and retaining screw ➋
7Attach the data and power connectors
Verify the new configuration by checking the HP Summary Screen
To access the HP Summary Screen, press Esc when the Vectra logo
appears during startup
Installing a Second Hard Disk Drive
6Attach all data and power connectors
Installing Removable Media Devices
Attach all data and power connectors. If you are installing a
Audio
Connector
(optional)
7Replace the cover (described in this chapter)
Configuring an IDE Device After Installation
Replacing the Floppy Drive
Installing Accessory Boards
Accessory Board Slots
Installing an Accessory Board
6If you slid out the system board to allow access to a lower slot, replace it
7Replace the retaining bracket
8The accessory board may need a special connection, such as:
•WOL (Wake on LAN) connector to the Network board
CD-ROM
For more information, refer to the documentation that came with
the accessory board
Configuring Accessory Boards with Plug and Play
Configuring non-Plugand Play ISA Accessory Boards
Replacing the Processor
Replacing the System Board
8Replace the lower bracket
9Replace the cover (described in this chapter)
Replacing the Power Supply
6Insert the new power supply (lining up the metal catches)
7Replace the four screws to secure the power supply
8Re-installthe hard drive tray (described in this chapter)
9Reconnect all internal power supply connectors
10Replace the cover (described in this chapter)
Changing the Battery
Installing a Security Cable