HP VLI 8 Installing an Accessory Board, 4.09 inches), 4Remove the slot cover, Remove the retaining bracket, Remove the computer’s cover (described in this chapter)

2 How to Install and Replace Components In Your Desktop PC Installing Accessory Boards

Installing an Accessory Board

NOTE	Use only XT format ISA accessory boards (width less than 10.4 cm or
	4.09 inches).
	1	Remove the computer’s cover (described in this chapter).
	2	Remove the retaining bracket.

3If the selected accessory board slot is located behind the processor, you may need to slide out the system board to allow access (refer to see “Replacing the System Board” on page 72 for information on how to do this).

4Remove the slot cover.

66