HP vp6320, vp6311, vp6310b, vp6315 manual Installing for rear projection, Locking the projector

Models: vp6320 vp6310 vp6310b vp6315 vp6311

1 75
Download 75 pages 7.76 Kb
Page 50
Image 50

1.Attach the projector to the ceiling using an HP ceiling mount kit. Refer to the installation instructions provided with the ceiling mount kit.

2.After the projector is mounted on the ceiling, adjust the projector settings to match this setup. Press enter, go to Setup > Advanced setup > Projector position, and select Front Ceiling.

Installing for rear projection

1.Place the projector 1 to 10 m (3 to 33 ft) behind a translucent screen that is designed for rear projection.

See “Setting up the projector” on page 16 or “Installing on the ceiling” on page 49 for more instructions.

2.Press enter, go to Setup > Advanced setup > Projector position. Then select Rear Table or Rear Ceiling.

Locking the projector

The projector includes a built in slot to secure the projector with a cable and lock (such as the Kensington MicroSaver lock system, available at many computer stores).

1.Wrap the cable around a secure object, such as a table leg. Loop the cable to create a slip knot around the stationary object, and be sure it cannot slip off.

2.Insert the lock 1 into the hole and twist the key 2.

50 Installing Permanently

Page 50
Image 50
HP vp6320, vp6311, vp6310b, vp6315 manual Installing for rear projection, Locking the projector