Picture menu
Some picture adjustments are available only when certain input ports are in use. Unavailable adjustments are shown in gray in the
Picture menu
Color settings... | Adjusts the picture and colors. |
|
|
Brightness | Brightens or darkens the picture. |
|
|
Contrast | Sets the difference between light and dark areas. |
|
|
Sharpness | Sharpens or softens the picture. |
|
|
Color saturation | Adjusts the intensity of colors. |
|
|
Tint | Shifts colors toward red or green. |
|
|
Color space | For certain component inputs, selects the type of color standard used by the |
| source. |
|
|
Reset color settings | Restores these color settings to the default settings. |
|
|
VGA settings... | Adjusts settings for a computer input. |
|
|
Resynchronizes the projector to the input signal. This can compensate for | |
| any change in the signal. |
|
|
Frequency | Adjusts the timing of the projector relative to the computer. |
|
|
Tracking | Adjusts the phase of the projector relative to the computer. |
|
|
Vertical offset | Adjusts the picture up or down within the projection area. |
|
|
Horizontal offset | Adjusts the picture left or right within the projection area. |
|
|
Picture mode | Adjusts color and picture settings to one of several combinations designed |
| for different types of viewing situations. You can use a different picture |
| mode for each source or each viewing environment. You can also customize |
| each picture mode. |
|
|
Customize picture mode... | Changes settings associated with the current picture mode. |
|
|
Picture enhancement | Refines the color, lightness, and other characteristics of the picture. |
|
|
White intensity | Increases the brightness of white areas. |
|
|
40 Adjusting the Projector
