Turning the projector on and off
Turning the projector on
1.Be sure the power cord is connected and the main disconnect switch is on.
2.Open the lens by sliding the lens cover 1 to the left.
3.Press the power button 2 on the projector or on the remote control.
The projector takes a minute or so to warm up. The power button blinks during
TIP: If the picture does not appear on the screen, try the following:
•If you are using a computer, press the key combination that turns on its video output. For example, press FN+F4 or FN+F5 on some computers.
•On the projector, press the source button one or more times to select the correct input port.
26 Setting Up
