HP 2011XI, XP599AAABA manual Front-Panel Controls, Using the On-Screen Display OSD

Front-Panel Controls

Control buttons (represented by icons) are located on the bottom right of the monitor.

Button	Icon	Description
Quick View		Opens the OSD Quick View menu where you can select a viewing mode which
		compliments or optimizes the content you are viewing.
Minus		Navigates down through the OSD menu and decreases adjustment levels.
Source		Chooses the video input source from the computer. Not supported on the 2011s
		model.
Plus		Navigates up through the OSD menu and increases adjustment levels.
Auto Adjustment		Press to automatically adjust the screen image.
		NOTE: This item can only be used with a VGA input signal.
OK		Enters the selected option in the OSD.
Menu		Opens, selects, or exits the OSD menu.
		NOTE: Pressing the Menu button for 10 seconds will disable operation of the
		remaining OSD buttons. Pressing it again for 10 seconds will re-enable
		functionality.
Power		Turns the monitor on or off. The Power button is located on the bottom-right of
		the monitor.
		NOTE: Pressing the Power button for 10 seconds will disable operation of the
		Power button. Pressing it again for 10 seconds will re-enable functionality.

Using the On-Screen Display (OSD)

Use the On-Screen Display (OSD) to adjust the screen image based on your viewing preferences. To access the OSD, do the following:

NOTE: The OSD is only available if there is at least one active video input selected for viewing on the monitor.

1.If the monitor is not already on, press the Power button to turn on the monitor.

2.To access the OSD menu, press the Menu button. The OSD Main Menu is displayed.

3.To navigate through the Main or sub-menu, press the + (Plus) button on the front panel of the monitor to scroll up, or the – (Minus) button to scroll in reverse. Then press the OK button to select the highlighted function.

4.To adjust the scale of a selected item, press the + (Plus) or – (Minus) button.

Front-Panel Controls 17