6.Loosen the 4 hard drive screws (1). Slide the hard drive (2) forward , and then remove the hard drive (3).

Installing a hard drive

NOTE: Your computer may look slightly different from the illustration in this section.

To install the hard drive:

1.Insert the hard drive into the hard drive bay at an angle (1), and then pull the plastic tab (2) towards the center of the computer to engage the hard drive with the connector.

2.Tighten the hard drive screws (3).

54 Chapter 8 Drives

Page 64
Image 64
HP ZBook 14 Mobile manual Installing a hard drive