NOTE: This section applies only to HP Pavilion ze4x00, HP nx9005 and nx9000, Compaq Evo Notebook N1050v and N1010v, and Compaq Presario 2100 and 1100 models.

Required Equipment

1 Phillips screwdriver

Removal Procedure

1.Unplug the AC adapter, if present, and then remove the battery.

2.Remove the keyboard cover (page 2-13).

3.Disconnect both the 2-wire and 4-wire cables that connect the switchboard PCA to the top case and speaker assembly, respectively.

4.Remove the M2.5×4.0mm screw that secures the keyboard, and then switchboard PCA to the top case (page 2-16).

5.Gently lift up on the keyboard, carefully remove the switchboard PCA from the top case, and then disconnect the underside motherboard cable.

Figure 2-13. Removing the Switchboard PCA

HP Pavilion ze4x00, HP nx9005 and nx9000,

Compaq Evo Notebook N1050v and N1010v, and

Compaq Presario 2100 and 1100 Models

2-18 Removal and Replacement

Service Manual