3.Turn the notebook bottom side up with the front facing forward.
4.Remove the following M2.5×4.0mm screws:
•One from the battery bay
•One from the hard disk drive bay
5.Remove the remaining 14 M2.5×6.0mm screws.
6.Turn the notebook top side up with the rear panel facing forward.
7.Remove the two M2.5×4.0mm screws from the rear panel.
8.Remove the two M2.5×6.0mm screws from the top case.
9.Lift the top case off of the notebook and then disconnect the touch pad cable from the motherboard.
Figure
HP Pavilion ze4x00, HP nx9005 and nx9000,
Compaq Evo Notebook N1050v and N1010v, and
Compaq Presario 2100 and 1100 Models
Service Manual | Removal and Replacement |