5.Remove the two M2.0×3.0mm flathead screws that secure the audio PCA shield to the bottom case.

6.Remove the audio PCA shield.

7.Remove the M2.0×3.0mm flathead screw that secures the audio PCA to the bottom case.

8.Remove the audio PCA.

Figure 2-25. Removing the Audio PCA

Reassembly Note

CAUTION: Use care when handling the audio PCA cable. Damaging the cable can degrade notebook performance.

Make sure you route the audio PCA cable into the clip on the bottom case.

Service Manual

Removal and Replacement

2-39