3.Remove the 4 screws that secure the hard disk drive guide to the bottom case.
NOTE: The 4 screws that secure the hard disk drive guide are 2 different sizes. The screw in the upper left corner is a M2.5x6.0mm screw. The remaining 3 screws are M2.0×4.0mm screws. Make sure these screws are installed in the correct locations when reinstalling the hard disk drive guide.
4.Remove the hard disk drive guide.
5.Disconnect the modem cable from the motherboard.
6.Disconnect the 1394 cable from the motherboard.
7.Remove the M2.5×6.0mm screw that secures the RJ11/1394 connector module to the bottom case.
8.Remove the RJ11/1394 connector module.
Figure
HP Pavilion ze5x00,
HP nx9010 and HP nx9008, and
Compaq Presario 2500 Models
Service Manual | Removal and Replacement |