HTC CEDA200, HTC Snap manual Date or Date & Time

Option	Allowsyouto
	Set a time length for displaying the captured image or video on the Review screen
Review Duration	before automatically saving it and returning to the live camera screen. Select NoLimit
	to allow the picture to be displayed until you choose to take another action. Select No	Camera/Multimedia
	Review to immediately return to the live camera screen after capturing.
	Choose a special effect such as Grayscale, Sepia, or Negative to apply to your photos
Effect	or video clips.
	Note: White Balance cannot be applied if an Effect has already been applied.
	Select a metering mode to allow the camera to measure the amount of light in the
Metering Mode	center and around the image and calculate the best-fit exposure value before
	capturing. Choose either Center Area to measure light using the center area of the
	image or Average to measure light using the area all around the image.
	Set a prefix to image or video filenames.
	When Default is selected as the prefix, the filename of each new captured file is set
	to “IMAGE” or “VIDEO” followed by a sequential number, for example:
Prefix	IMAGE_001.jpg. You may also choose to prefix filenames using either the current
	Date or Date & Time.
	Note: If you set the camera to save captured photos to a storage card, the prefix
	cannot be selected. Captured photos will be named using the DCIM (Digital Camera
	Images) naming standard.
Counter	Select Reset to reset the naming counter to 1.
	When taking indoor shots, flicker on the camera screen may be caused by
Flicker Adjustment	interference from fluorescent lighting. To reduce flicker, change the flicker adjustment
	setting to the proper frequency (50Hz or 60Hz) of the location where your phone is
	being used.
Direction
(Panorama mode	Choose in what direction images will be stitched in a panorama.
only)
Stitch Count
(Panorama mode	Select the desired number of snapshots to be taken and stitched into a panorama.
only)
Template Folder	By default, templates are stored in the \My Documents\Templates folder on the
	phone’s main memory. If you transferred some templates to a storage card (using
(Picture Theme
	File Explorer), set this option to Main + Card to specify that templates are located in
mode only)
	both the main memory and the storage card.
Show Reminder	Select On to be prompted to set the picture to a contact after taking a contact picture.
(Contacts Picture
	Select Off to disable the prompt.
mode only)
About	Display the camera’s firmware information.

2D. Camera and Multimedia 49