| OPERATION | |
Manual Transport | 1 | |
When pushing or pulling the mower, be sure to engage |
| |
the IZT (Integrated Zero Turn Transaxle) bypass |
| |
linkages. The IZT bypass linkages are located on the |
| |
rear of the frame. |
|
|
WARNING! |
| |
No adjustments or maintenance |
| |
to be carried out unless: |
| |
• | the engine stopped |
|
• the ignition key removed |
| |
• the parking brake activated | ||
1. IZT Bypass Linkages | ||
|
| Bypass position with linkage head outside rear deck |
•Raise the deck into the highest cutting position.
•Pull the IZT bypass linkages out and into the slots and release so that it is held in the bypass position.
•To reengage the IZT’s to drive, reverse the above procedure.