maintenance
Fuel Filter
Replace the
To replace the filter:
1.Move the hose clamps away from the filter using a
2.Pull the filter loose from the hose ends.
3.Push the new filter into the hose ends. Position the filter with the “FLOW” arrow pointing up toward the fuel pump. If necessary, a soap solution can be applied to the filter ends to ease mounting.
4.Move the hose clamps back toward the filter.
Fuel filter
Tire Pressures
All four tires shall have a pressure of 15 psi / 103 kPa /1 bar.
IMPORTANT INFORMATION
The machine must be absolutely standing still when applying the parking brake.
Parking Brake
Visually check that no damage is found on the lever, links, or switch belonging to the parking brake. Perform a standstill test and check that there is sufficient braking action.
To adjust the parking brake, contact the Husqvarna service workshop.
WARNING!
Faulty adjustment results in reduced braking ability and can cause an accident.
Tire pressures
Parking brake