CONTROLS
Blade switch
To engage the mower deck, pull the blade switch knob out. The mower blades are disengaged when the knob is pressed down fully.
Blade Switch
Ignition Switch
The ignition key is placed on the control panel and is used to start and stop the engine.
WARNING!
Do not run the starter for more than five seconds each time. If the engine does not start, wait 10 seconds before retrying.
Ignition Switch
Choke Control
The choke control is used for cold starts to provide the engine with a richer fuel mixture.
The throttle control is equipped with a choke detent. Pressing the throttle control all of the way forward will choke the engine. For full throttle, press the throttle control forward until you feel the detent.