CONTROLS
This operator’s manual describes the Husqvarna Zero Turn Rider. The rider is fitted with either a Kohler or Briggs & Stratton
Transmission from the engine is made via two belt- driven hydraulic pumps, which in turn drive a hydraulic motor for each drive wheel. Using the left and right steering controls, the flow is regulated and thereby the direction and speed.
Zero Turn Rider
Control Locations
12 | 11 | 10 | 9 | 8 | 7 | 6 | 5 |
| 1 | 2 | 3 | 4 |
1. | Motion control levers |
| 7. | Ignition switch |
2. | Seat adjustment lever |
| 8. | Choke control |
3. | Fuses |
| 9. | Throttle control |
4. | Bypass Linkages |
| 10. | Hour meter |
5. | Fuel tank cap |
| 11. | Parking brake |
6. | Blade switch |
| 12. | Cutting height adjuster |
