click Remove.

5.Delete all the other wireless network connections from the

Preferred Networks area.

6.Click OK.

Step 2 Set up an unencrypted wireless network connection.

Does the WPS function have any special requirements on the wireless encryption settings of the HG532s?

The WPS function can be used only when the security mode of the wireless network is set to WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK, and the SSID is set to SSID1. It is recommended that you set the security mode to WPA-PSK/WPA2-PSK.

What can I do if I cannot set up a wireless connection between the HG532s and the computer by pressing the WPS button?

Step 1 Check that only one computer tries to connect to the HG532s using the WPS function at a time.

Step 2 Check that the wires network function and the WPS function in PBC mode are enabled on the HG532s.

Step 3 Check that the security mode of the wireless network is set to WPA-PSK, WPA2-PSK, or WPA-PSK/WPA2-PSK, and SSID is set to SSID1.

Note that the WPS function is forcibly disabled if the wireless network uses the Wired Equivalent Privacy (WEP) encryption.

Step 4 Check the positions of the HG532s and the computer. Ensure that they are far from the electric appliances such as microwave ovens, refrigerators, or cordless telephones that generate strong magnetic or electric fields.

Step 5 Place the HG532s in an open area.

Although radio signals can pass through obstacles, their transmission is affected if they pass through too many obstacles such as walls.

28

Page 33
Image 33
Huawei HG532S manual Preferred Networks area