**•ChannelNumber
Selectthe number of VHF/UHF channel, in which the transport stream is transmitted by using
alsothe NUMERICAL(0~9) button. If the number is correct, the receiver will search any
serviceseasily.
**
•Frequency
Enterthe your desired frequency to search directly. When entering frequency, the appropriate
servicefor the entered frequency is automatically displayed on Service. When you enter the
frequency,you use the NUMERICAL(0~9) button.
**
•Mode
Selectone option among Auto, 2K FFT and 8K FFT for service search. If you don't know the
value,please select Auto.
**
•GuardInterval
Selectone option among Auto, 1/4,1/8,1/16 and 1/32 for service search. If you don't know the
value,please select Auto.
**
•NetworkSearch
Ifspecified frequency service information and other service information are provided together,
theservice, which belongs to other frequency service, is also searched. Select Yes to search
allservices in the network. If not, select No.
3. Default Search
DefaultSearch restores the receiver to the default settings
Warning: PleaseNote that once you perform Default Search, all data such as Aerial Setting
informationService List, and User Configured data are deleted.
1. Select OK and press the OK button to restore all
settingto Factory Default.
2. Select CANCEL and press the OK button to cancel
defaultsetting.
3. When default setting is completed, Automatic Search is
automaticallydisplayed, which helps Service Search.
**
8. Installation
GB 38
**
**
**
**
**
**
**
**
**
**
**
**
**
**