** | ** |
|
|
**
3. Setup
**
**
3.3 Service Searching
If your receiver is connected to the aerial and television, you can automatically or manually search services.
1.Press the MENU 
button
2.Select Installation using the 
button and press the
OK 
button.
3.Select Service Searching using the 
button and
press the OK 
button.
4.Enter a PIN code. The default PIN code is 0000.
5.Select Automatic Search or Custom Search using the
button and press the OK 
button
1.Automatic Search
If your receiver is connected to the aerial and television, you can automatically search services without entering any other information.
1.Select Start Service or End Service using the 
button.
2.Press the 
or NUMERICAL (0~9) button to input the start or end service number
3.Press the OK 
button to start the search.
2.Custom Search
You can search services manually by searching parameters, if you know the service information.
Select Channel, Frequency, Mode, Guard Interval or Network
Search using the 
button and press the 
button.
**
**
**
GB 16
**
**
**
**
**
