Waypoints

Settings: Create, Edit, Delete, Cursor To, Go To,

Target, Grid

Waypoints allows you to view the Way points submenu. See Introduction to Navigation for more information.

The Waypoints Submenu contains the following menu options:

Create allows y ou t o creat e a new way point, name it , and edit it immediately. The current boat position will be used as the default, but you can set the coordi nates to a ny valid po sition. The ico n used to represent th e w aypoint in th e Ch art an d C ombo Views can also be changed.

Edit allows you to choose from the saved waypoints list, and then edit the Name and Pos ition (Latitude and Longitude), as well as assign an Icon to represent the waypoint in the Chart and Combo Views.

Delete allows you to delete a waypoint from the saved waypoints list.

Cursor To allows you to move the cursor quickly to a waypoint from the saved waypoints list.

Go To allows you to select a waypoint and start navigation toward that waypoint or add that waypoint to the end of the current route.

Target allows you to apply a ta rget to a waypoint selected from the saved waypoints list.

Grid allows you to apply a trolling grid to a waypoint selected from the saved waypoints list.

NOTE: Only one waypoint can have either a target or a grid applied to it at one time. If you apply a target or a grid to a new waypoint, the originalwaypoint will lose its target or grid.

NOTE: The spacing of the rings on the waypoint targetand thespacing of the gridlines on the trolling grid is the same as the length of the scale bar on the left edge of the display. Zooming in or out will decrease or increase the spacing, respectively.

Navigation Menu Tab

70