Map Datum

(Advanced)

Settings: Various, Default = WGS 84

Map Dat um allows y ou t o change the map co ordinate system used by the Fishfinder to match those of a paper map.

Set Simulation Position

(Advanced)

Settings: Follow screen instructions to activate.

Set Simulation Position allows you to set the p osition of the boat used in the Simulator. Press any arrow on the 4- WAY Cursor C ontrol key to ac tivate the cursor a nd move it to the coor dinates where yo u wan t sta rt the simulation. Then confirm the position using the Set Simulation menu setting.

NOTE: The cursor must be active in order for this procedure to work. If the cursor was not active before you began this procedure, an error message will appear. Exit the menu, set the cursor, then try again.

Set Map Offset

(Advanced)

Settings: Follow screen instructions to activate.

Set Map Offset allows you to change the map offset used by your Fishfinder. Press the 4-WAY Cursor Control key t o activate the cursor and m ove it to the location where the Map Off set will be a pplied. Then, confirm the map offset position using the Set Map Offset menu setting.

The Map Offset will be applied to all map s and not just the map that requires the correction. The Map Offset should be cleared if a different map is to be used.

NOTE: The cursor must be active in order for this procedure to work.If the cursorwas not active before you began this procedure, an error message will appear. Exit the menu, set the cursor, then try again.

75

Navigation Menu Tab