Alarms Menu Tab, Depth Alarm, Fish ID Alarm | Humminbird 47 guide

M47_Man_Eng_531338-1_A.qxd 12/13/2004 12:36 PM Page 46

Alarms Menu Tab

From any view, press the MENU key twice to access the Main Menu System. The Alarms tab will be the default selection.

NOTE: When an alarm is triggered, you can silence it by pressing any key. The alarm will be silenced, and will not be triggered again until a new instance of the alarm condition is detected.

Alarms Menu

Depth Alarm

Depth Alarm sounds when the depth becomes equal to or less than the menu setting.

To change the Depth Alarm setting:

1.Highlight Depth Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Depth Alarm setting. (OFF, 1 to 100 feet, or 0.5 to 30 meters [International Models Only], Default = OFF)

Fish ID Alarm

Fish ID Alarm sounds when your Matrix™ Fishing System detects fish that correspond to the alarm setting. Fish ID Alarm will only sound if Fish ID+™ is on.

For example, if you've set the Fish ID Alarm to sound for Large fish only, the Fish ID Alarm will sound when a large-sized fish is detected.

To change the Fish ID Alarm setting:

1.Highlight Fish ID Alarm on the Alarms main menu.

2.Use the LEFT or RIGHT 4-WAY Cursor Control keys to change the Fish ID Alarm setting. (Off, All, Large/Medium, Large, Default = Off)

All

Large/Medium

Large

41

42

Image 24

Humminbird 47, 531338-1_A Alarms Menu Tab, To change the Depth Alarm setting, To change the Fish ID Alarm setting

Contents

Matrix 47 Operations Manual Table of Contents Thank You Alarms Menu Tab Setup Menu TabViews Menu Tab Accessories Menu Tab Troubleshooting Sonar Menu Tab How Sonar Works 3D Sonar2D Sonar Temperature water surface temperature What’s On the Display 3D View What’s On the Display 2D View Below the cursor Views 3D Sonar View3D Sonar View 3D/2D Sonar Combo View Beam Sonar View3D/2D Sonar Combo View Beam Sonar View 2D Sonar View Real Time Sonar RTS Window2D Sonar View 2D Zoom View 2D Big Digits View2D Big Digits View 2D Zoom View Bottom Presentation POWER/LIGHT Key Key FunctionsView Key Menu Key Accessory Bus Powering Up the UnitMenu System Matrix 47 3D Title Screen Start-Up Options Menu Normal Operation Self Test Accessory Test SimulatorSystem Status PC Connect Sonar X-Press Menu 3D Bottom Zoom3D Lower Range Reset View 3D History2D Sonar Window Beam Sensitivity To adjust the Upper Range To adjust the Lower RangeUpper Range Lower Range Chart Speed Bottom ViewZoom Level Sonar Menu Tab 3D Bottom Style3D Frame Style Beam Select Fish ID+ Fish SensitivityFish ID 3D Reference To change the RTS Window setting To change the Depth Lines settingDepth Lines Highlight RTS Window on the Sonar main menu Surface Clutter Noise FilterMax Depth Water Type Alarms Menu Tab Depth AlarmFish ID Alarm To change the Depth Alarm setting Low Battery Alarm Alarm ToneSetup Menu Tab To change the Low Battery Alarm setting User Mode Units DepthUnits Temp Units Distance Triplog Reset Restore DefaultsSelect Readouts Depth Offset Temp OffsetSpeed Calibration Nmea Output Views Menu TabFollowing Nmea sentences are output To turn Nmea Output on or off Accessories Menu Tab TroubleshootingNegative terminal or ground Fuse is operational Display Problems Problem Possible CauseControl head loses power at high speeds Finding the Cause of Noise Matrix Fishing System Accessories Specifications Contact Humminbird