What’s On the Display (3D View)
In 3D views, your Matrix™ Fishing System can display a variety of useful information about | the area under and adjacent to your boat, including the following items: |
Depth - water depth; can be set to alarm when the water becomes too shallow.
Temperature - water surface temperature.
Bottom Contour - Shows the shape of the bottom derived from depth measurements on 6 beams. 3 bottom styles are available; the front edges of the bottom contour are outlined to create a visual anchor. The width of the bottom covered is approximately equal to the depth.
Timer - elapsed time with Temp/Speed
Accessory or GPS Receiver.
Distance - distance traveled with Temp/Speed
Accessory or GPS Receiver.
Average Speed - average speed reading with
Temp/Speed Accessory or GPS Receiver.
Speed - if a Temp/Speed accessory or GPS Receiver is attached, the Matrix can display the speed of the boat, and can keep a Triplog of nautical or statute miles traveled.
Battery Voltage - the voltage of the boat’s battery; can be set to alarm if the voltage falls below a certain point.
Boat/Direction Arrow - A simple, solid 3D boat is drawn when the Upper Depth Range is
0.A solid 3D arrow is drawn when the Upper Depth Range is not 0.
Fish ID+™ - A fish icon will be shown at the derived position of the fish. Six fish icon styles will be used to indicate the primary beam in which the fish was found.
Upper and Lower Depth Range Labels
Frame - provides a reference for bottom and Fish ID information. A Range of frame styles are available, from simple to complex.
NOTE: Entries in this view that list (with Temp/Speed or GPS Receiver) are available if either device is | connected to the Matrix™ Fishing System. If both devices are connected, then only the information from |
the GPS receiver will be displayed on the view. |
|
3 | 4 |
