Humminbird 531338-1_A, 47 manual Triplog Reset, Restore Defaults, Select Readouts

M47_Man_Eng_531338-1_A.qxd 12/13/2004 12:36 PM Page 52

Triplog Reset

(with Temp/Speed or GPS Receiver)

Triplog Reset resets the Triplog to zero, and will appear in the menu if a Temp/Speed Accessory is connected and the paddlewheel has moved at least once, or if a GPS Receiver is connected. The Triplog provides the following information: timer for elapsed time, distance traveled since last reset, and average speed.

NOTE: See Setup Menu Tab: Select Readouts to find out how to display Triplog information on the screen.

To Reset Triplog:

1.Highlight Reset Triplog on the Setup main menu.

2.Use the RIGHT 4-WAY Cursor Control key to initiate Triplog Reset.

3.The Confirm dialog box will appear. To reset the Triplog, press the RIGHT 4-WAY Cursor Control key once more. To cancel Reset Triplog, press the LEFT 4-WAY Cursor Control key.

Restore Defaults

Restore Defaults resets ALL menu settings to their factory defaults. Use this menu choice with caution!

To Restore Defaults:

1.Highlight Restore Defaults on the Setup main menu.

2.Use the RIGHT 4-WAY Cursor Control key to initiate restoring defaults.

3.The Confirm dialog box will appear. To reset the defaults, press the RIGHT 4-WAY Cursor Control key once more. To cancel Restore Defaults, press the LEFT 4- WAY Cursor Control key.

Select Readouts

(Advanced: 3D and 2D Sonar Views Only)

Select Readouts sets individual digital readouts on the 3D or 2D Sonar View. This Advanced feature allows you to select what data will be displayed in each of 6 fixed-position data windows arranged around the left and bottom edges of the 3D or 2D Sonar View screen, or whether a particular data window will be turned off, displaying nothing in that area; you can access this menu choice only when in Advanced User Mode (see Setup Menu Tab: User Mode.)

	Data windows can display readouts from supported
	accessories such as Temp/Speed. Each data window
	can either be empty or contain one of the following:
	- Speed (will be displayed if a Temp/Speed Accessory
	is attached and the paddlewheel has moved at least
	once, or if a GPS Receiver is connected)
	- Temperature
	- Triplog (will be displayed if a Temp/Speed Accessory
	is attached and the paddlewheel has moved at least
	once, or if a GPS Receiver is connected)
	- Voltage
	- Water Speed (will only be displayed if a
Select Readouts	Temp/Speed Accessory is attached and the
	paddlewheel has moved at least once). Water Speed
	is not available with a GPS receiver.

47 48