English---6
115374327 Rev.6 5/31/12
SAFETY INSTRUCTIONS
Throttlelock--out
SMake sure the throttle control is locked
at the idle setting when the throttle lock--
out is released.
SPress the throttle lock--out and make
sure it returns to its original position
when you release it.
SCheck that the throttle control and
throttle lock--outmove fr eely and that the
return springs work properly.
SSee instructions under the section
“Start”. Start the machine and apply full
throttle. Release the throttle and check
that the cutting attachment stops and re-
mains at a standstill. If the cutting attach-
mentr otates with the throttle in the idle
position then the carburetor idle setting
must be checked. See instructions under
the section “Maintenance”.
Stop switch
SStart the engine and make sure the engine
stops when you push and hold the stop
switch.
Cuttingattachment guard
SEnsure that the guard is undamaged and
is not cracked.
SReplace the guard if it has been exposed
to impact or is cracked.
SAlways use the recommended guard for
the cutting attachment you are using. See
section on “Technical data”.
Muffler
SNever use a machine that has a faulty
muffler.
SRegularly check that the muffler is securely
attached to the machine.
SThemuffler on this unit is equipped with a
special spark arrestor mesh. T he mesh
should be checked and, if necessary.
cleaned by a servicing dealer. A blocked
meshw ill cause the machine to overheat,
which can lead to serious damage. Never
usea muffler with a defec tive spark arres-
tor mesh. See the Maintenance section.