English---22
115374327 Rev.6 5/31/12
TECHNICAL DATA
Attachments Part. no.
Edger attachment with shaft 952 711 607
Cultivator attachment with shaft 952711 608
Blower attachment with shaft 952 711 609
Brushcutter attachment with shaft 952 711610
Pruner attachment with shaft 952 711 612
Technicaldata 128CD 128LD
Engine
Cylinder volume, cu.in./cm31.7/28 1.7/28
Cylinder bore, inch/mm 1.4/35 1.4/35
Stroke, inch/mm 1.130/28.7 1.130/28.7
Idle speed, rpm 2,800--3,200 2,800--3,200
Recommended max. speed, rpm 10,000 11,000
Speed of output shaft, rpm 8,000 8,000
Max. engine output, acc. to ISO 8893, hp/kW 1.1/0.8 1.1/0.8
Catalytic converter muffler Yes Yes
Speed--regulatedignition sys tem Yes Yes
Ignition system
Manufacturer/type of ignition system Walbro/CD Walbro/CD
Spark plug Champion C hampion
RCJ--8Y RCJ--8Y
Electrode gap, inch/mm 0.024/0.6 0.024/0.6
Fuel and lubrication system
Manufacturer/type of carburetor Zama Zama
Fuel tank capacity, US pint/liter 0.85/0.4 0.85/0.4
Weight
Weightwithout fuel, c utting attachment and guard, lbs/kg 10/4.4 11/4.8
Sound levels (see note 1)
Equivalent sound pressure level at the us er’s ear,
measured according to ANSI B175.3--1997, dB(A), min/max: 94/97 9 4/97
Vibration levels
Vibrationlev els at handles, measured according to ANSI
B175.3--1997,m/s2
At idle, left/right handles: 3/5 3/5
At max. speed, left/right handles: 9/8 9/8
NOTE! This spark ignition system complies wit h the Canadian standard ICES--002.
Note1: Equiv alent noise pressure level is calculated as the time--weighted energy total for
noise pressure levels under various work ing conditions with the following time distribution:
1/2 idle and 1/2 max. speed.
NOTE!N oise pressure at the user’s e ar and vibration on the handles are measured with all the
machine’s approved cutting equipment fitted. The table indicat es the highest and lowest values.
Model 128CD (3/8 RH arbor shaft thread)
Approved accessories Type Cutting attachment / guard,part. no.
Trimmerhead TNG7 53741 92-14 / 545 03 11-01
These accessories used in combination with the specified power heads have been evaluat-
edt o applicable ISO--and EN saf ety requirement standards by the Swedish Machinery
TestingInstitute:
Model 128LD (M10 LH arbor shaft thread)
Approved accessories Type Cutting attachment / guard,part. no.
Trimmerhead T25 537 3383- 06 / 545 0309- 01
Plastic blades Tricut300 mm 531 00 38--11 / 545 03 09-01
These attachments used in combination with the specified powerhead hav e been evaluated
to ANSI B175.3--2003,“Gras s Trimmers and Brushcutters -- Safety Requirements”. These
combinations have been evaluated by Underwriter’s Laboratories Inc . (UL) and are conse-
quently UL listed: