Husqvarna 11C, 13C, 16CAWD, 11R manual Replacing the air filter, Maintenance, Important Information

Maintenance

3Pull back the throttle to the full throttle position and check that the choke is no longer actuated.

Replacing the air filter

If the engine seems to lack power or does not run smoothly this may be because the air filter is clogged. It is therefore important to replace the air filter at regular intervals (see Maintenance/Maintenance Schedule for the correct service interval).

Replace the air filter as follows:

1Open the engine cover.

2Pull up the handle on the air filter cover, unhook and turn towards the engine.

3Remove the air filter cover.

4Lift out the air filter cartridge from the fan housing.

5Replace the air filter cartridge, if clogged with dirt.

IMPORTANT INFORMATION

Do not use compressed air to clean the paper filter.

Do not oil the paper filter. They must be fitted dry.

6Carefully lift the precleaner out of the fan housing.

7Carefully clean the fan housing so that dirt does not fall down into the carburettor.

8Insert a new precleaner and air filter cartridge in the fan housing.

9Align the tabs on the cover with the slits in the housing and replace the air filter cover.

10Pull the handle outwards. Secure the handle in the air filter cover and close the cover by pressing it inwards.

24 – English