2

To Assemble Bagger

1.Front bagger tube

2.Vinyl binding

1

2

3

4

02905

Unfold bag by pivoting front bagger tube all the way forward and pressing the bottom vinyl binding onto the tube.

Inside the bag, install spreader bars and retainer springs onto pins on both sides of bag as shown.

Press the vinyl bindings onto the sides of front bagger tube.

Slide the bagger dump handle through the hole in the bagger top, install the clevis pin 10 x 44mm and secure with retainer spring.

Push cap over end of bagger dump handle.

NOTE: For future use, the clevis pin may be removed in order to use the handle to clear the chute in the event it has become clogged.

 

 

5

3.

Spreader bars

4

4.

Retainer spring

5.

Vinyl binding

 

2906 0

5

6

7

8

6.Dump handle tube

7.Clevis pin 10 x 44mm

8.

Retainer spring

 

02

 

 

9

907

9.

Cap

 

 

 

1.

Top Surfaces Even

 

6MM (1/4") - 9MM (3/8")

2.Horizontal Adjustment Bracket

3.Vertical Adjustment Bracket

4. Bagger Latch

1

2

3

02967

4

Bagger adjustment

For proper bag function and appearance, it may be neces- sary to adjust the bagger assembly. There should be 6mm (1/4")-9mm (3/8") gap between the bagger top and fender and the bagger top surface should be even with the top surface of the fender. To adjust bagger position:

Horizontal adjustment

Slightly loosen the nuts securing the bagger RH and LH horizontal adjustment brackets. Loosen only enough so the brackets keep their position, but allow them to be moved.

Move the brackets the amount forward or backward you wish the bag assembly to move. Retighten the nuts securely.

Vertical adjustment

Slightly loosen the nuts securing the vertical adjustment brackets. Loosen only enough so the brackets keep their position, but allow them to be moved.

Move the brackets the amount up or down you wish the bag assembly to move. Retighten the nuts securely.

Reinstall the bagger assembly and check the bagger to fender fit. If necessary, repeat the procedure until proper fit is attained.

After proper fit is attained, remove bagger from tractor and install bagger latch (4) to tractor back plate as shown. Tighten securely.

Install and carefully lower bagger to actuate latch.

Measure distance between bagger and latch as shown. If distance is not 10mm - 16mm carefully remove bagger and repeat vertical adjustment as needed.

02983

10MM (7/16") - 16MM (5/8")

4

To convert to bagging, mulching or discharge See "Section 5" of this manual.

24

Page 24
Image 24
Husqvarna CTH140TWIN instruction manual To Assemble Bagger, Bagger adjustment, Horizontal adjustment, Vertical adjustment

CTH140TWIN specifications

The Husqvarna CTH140TWIN is a powerful and versatile lawn tractor that makes mowing large lawns a breeze. With its impressive features and advanced technologies, it's designed to provide a smooth mowing experience while ensuring optimal performance.

One of the main characteristics of the CTH140TWIN is its robust engine. Equipped with a strong twin-cylinder engine, it delivers high torque and superior performance. This ensures consistent power even in challenging mowing conditions. The engine is paired with a smooth hydrostatic transmission that allows for seamless speed control and ease of operation, meaning users can effortlessly adjust their speed without having to change gears.

Another standout feature of the Husqvarna CTH140TWIN is its innovative mowing deck design. The 40-inch cutting deck is made from high-quality steel, offering durability and longevity. It features an easy-to-adjust cutting height, allowing users to select the perfect height for their lawn conditions. This flexibility ensures that your grass is cut to the desired length without compromising health.

The CTH140TWIN also integrates advanced technologies to enhance user convenience. The ergonomic steering wheel, coupled with a comfortable seat with armrests, provides a superior level of comfort during extended mowing sessions. In addition, the easy-access control panel enables users to operate the mower's various functions effortlessly.

For those concerned about storage and space, the Husqvarna CTH140TWIN boasts a compact design, making it easy to navigate through tight areas. The tight turning radius allows for efficient maneuverability, ensuring that users can effectively reach tricky spots in their yard without leaving uncut patches.

Furthermore, the tractor features a reliable cutting system that can be configured for either side discharge, mulching, or bagging grass clippings. This versatility provides homeowners with options to manage their lawn waste according to their preferences.

Finally, maintenance is simplified with the inclusion of an automatic blade engagement feature. This ensures that the mower blades engage smoothly and helps minimize wear on the engine and transmission.

In conclusion, the Husqvarna CTH140TWIN is engineered for those seeking a robust, versatile, and user-friendly lawn tractor. Its powerful twin-cylinder engine, innovative features, and comfortable design make it an excellent investment for maintaining a beautiful and healthy lawn. Whether you are managing a small garden or a substantial lawn, the CTH140TWIN from Husqvarna stands ready to deliver exceptional results.