Pre Operation Checklist

Before leaving our factory, every machine is thoroughly tested. Follow our instructions strictly and your machine will give you long service in normal operating conditions.

Before starting up the machine, make sure you read these entire Operating Instructions and are familiar with the operation of the machine.

MACHINE SET-UP:

ALWAYS park machine on a level surface with the engine “OFF” and the ignition switch set in the “0” (OFF) position before performing any maintenance. Let the machine cool down!!

1.Check engine oil. Fill to the full mark on dip stick with 15W40 class CE or CD oil.

2.Connect battery cables.

1 - 2 HOUR OPERATION CHECK LIST:

ALWAYS park machine on a level surface with the engine “OFF” and the ignition switch set in the “0” (OFF) position before performing any maintenance. Let the machine cool down!!

1.Check the engine air cleaner hose clamps. Tighten as required.

2.Tension the blade drive V-belts. DO NOT over tension!!

Scheduled Maintenance Quick Reference

Before performing any maintenance, ALWAYS park the machine on a level surface with the engine “OFF” and the ignition switch set in the “OFF” position. Let the machine cool down!!

SERVICE DAILY:

1.Check engine oil level.

2.Check blade guard for damage.

3.Check hoses and clamps for damage or looseness. Tighten or replace as necessary.

4.Check air cleaner restriction indicator. Replace primary air filter if indicator is red.

5.Make sure all safety guards are in place and in good condition.

SERVICE EVERY 50 HOURS:

1.Clean Rear shield Air filter.

2.Inspect Radiator Air Filter and clean as necessary.

3.Check blade drive V-belt tension. Tension both sides evenly. DO NOT over tension!!!

4.Lubricate front wheel bearings.

5.Replace Hydraulic System Filter. (First 50 hours only.)

SERVICE EVERY 100 HOURS:

1.Replace engine oil and filter.

2.Lubricate front axle pivot bearings.

3.Check wheels for wear or damage.

4.Check rear wheel hubs and wheels for looseness.

5.Check engine air cleaner hose and clamps.

6.Check hydraulic system fluid level.

SERVICE EVERY 250 HOURS:

1.Replace Hydraulic System Filter

2.Grease Blade Shaft 2 pumps each end.

SERVICE EVERY 500 HOURS:

1.Replace Engine gearbox fluid.

2.Replace hydraulic system fluid.

3.Replace engine fuel filter (spin-on type).

SERVICE YEARLY:

1. Replace air filter primary and safety element.

45

Page 45
Image 45
Husqvarna FSA 8400 D Machine SET-UP, Hour Operation Check List, Service Daily, Service Every 50 Hours, Service Yearly

FSA 8400 D, FS 6600 D specifications

Husqvarna has long been a trusted name in the world of professional outdoor power equipment, and its FS 6600 D and FSA 8400 D models exemplify the company's commitment to quality and performance.

The Husqvarna FS 6600 D is a powerful walk-behind concrete saw that is renowned for its exceptional cutting efficiency and robust design. Powered by a high-torque diesel engine, the FS 6600 D is engineered to handle tough, heavy-duty applications with ease. One of its standout features is its adjustable, heavy-duty frame that can accommodate various blade sizes, making it versatile for different cutting depths and applications. The saw's integrated water system helps to manage dust and keeps the blade cool during operation, resulting in cleaner cuts and prolonging blade life. Furthermore, the intelligent design of the FS 6600 D includes an easy-to-use control panel, ensuring operators can quickly start and adjust the saw without hassle.

On the other hand, the Husqvarna FSA 8400 D is part of Husqvarna’s range of professional grass trimmers, specifically designed for demanding tasks and prolonged use. Its lightweight yet robust design makes it an ideal choice for professionals who require mobility and efficiency. The FSA 8400 D features a high-capacity battery and an efficient brushless motor, ensuring powerful performance with minimal noise and vibration. The trimmer’s adjustable handle and ergonomic design allow users to maneuver easily, reducing fatigue during extended usage.

Both products also incorporate advanced technologies to enhance user experience. For instance, the FS 6600 D employs Husqvarna’s SmartStart technology, allowing for easier and faster starts. Similarly, the FSA 8400 D utilizes an intuitive control system that seamlessly integrates speed and power settings, optimizing performance based on the demands of the task at hand.

In summary, the Husqvarna FS 6600 D and FSA 8400 D are prime examples of innovative engineering combined with user-focused design. Their robust features, advanced technologies, and unmatched performance make them essential tools for professionals looking to excel in their trade. Whether cutting concrete or tidying up grassy areas, Husqvarna proves that it understands the needs of its users, delivering reliable solutions that stand the test of time.