DESCRIPTION
1 | Upper handles | 12 | Rear deflector |
2 | 13 | Throttle lever | |
3 | Fastening knobs for upper handles | 14 | Engine stop lever |
4 | Grass catcher | 15 | Reduction gear |
5 | Oil filler cap | 16 | Ignition key |
6 | Oil drain plug | 17 | Handle advance speed |
7 | Deck | 18 | Clutch lever |
8Adjusting levers for cutting height
9Spark plug
10Fuel cap
11Engine
ASSEMBLY OF GRASS CATCHER
ASSEMBLY deflector (if not already assembly)
ASSEMBLY HANDLES (lower)
ASSEMBLY HANDLES (upper)
ADJUSTMENT OF HANDLES
MULCHING CAP INSERTION (for the models where it is included only)
To cut the grass with the mulching system (no grass collection), lift the rear deflector panel and insert the cap by fixing it with the spring as shown in the figure.
ADJUSTMENT OF CUTTING HEIGHT
SAFETY PRECAUTIONS
Always operate with the deflector or grasscatcher in the correct position.
Always stop the engine before removing the grasscatcher or adjusting the height of cut.
Never place your hands or feet underneath the deck or into the grass discharge chute while the engine is running.
Before mowing, remove all foreign objects from the lawn which may be thrown by the machine. While mowing, stay alert for any foreign objects which may have been missed.
Never lift the rear of the mower while starting the engine or during normal operation.
Never place your hands or feet underneath the deck or into the rear discharge chute while the engine is running.
