Manuals / Husqvarna / Lawn and Garden / Chainsaw

Husqvarna SMB 70, SMB 70 E manual Saw Carriage Adjustment, Installation

Models: SMB 70, SMB 70 E

1 40

Download 40 pages 5.03 Kb

Page 18

Image 18

INSTALLATION

Saw Carriage Adjustment

The saw carriage is aligned on the rails by fitting its lower guide wheels and rail guards. The lower guide bearings have the task of preventing the saw carriage from tilting and the rail guards keep the rails and the saw carriage’s wheels free from dirt and the like. Assembled on the saw carriage are:

•Two lower guide wheels

•Four rail guards.

Assembly is done as follows:

1.Fix the guide wheel’s bracket in place with a screw. Place a 0.2 mm feeler gauge between the bearing and rail.

2.Press the bearing against the rail and tighten the bearing bracket screw. Tightening torque: 40-50 Nm. Now remove the feeler gauge.

3.Carry out 1-2 above for the remaining guide wheels.

4.Position the four rail guards above the wheel.

5.Adjust and screw into place the frame (25) and guide FIG. 26 A.

FIG. 23

FIG. 24

0,2 mm

FIG. 25

FIG. 26

18 –English

Page 18

Image 18

Husqvarna SMB 70, SMB 70 E manual Saw Carriage Adjustment, Installation

Contents

SMB SMB 70 E Operator´s manualTABLE OF CONTENTS INTRODUCTION Introduction English –KEY TO SYMBOLS SymbolsWarning Signs SAFETY REGULATIONS Safety RegulationsPersonal Protective Equipment Safety During Use The One-manSawmill Safety EquipmentFuel Safety PersonnelDESCRIPTION One-manSawmill Petrol Engine38.Open ended spanner 13-15mm DESCRIPTIONTools and operator’s manual 39.Open ended spanner 17-19mm 40.Socket spannerOne-manSawmill Electric Motor DESCRIPTIONDESCRIPTION Tools and operator’s manual10 – English Frame FIG. 3 and FIG. Height Setting FIG.Carriage FIG DESCRIPTIONBand Wheels FIG Cleaning Tank FIG.Handlebars FIG. Bandsaw and Band Guide FIGLog Bolsters A Height Adjustment BDESCRIPTION Rails Folding Stops CRail Guard Adjustable Support FeetRail Stop DESCRIPTIONBand Wheel Guard Safety DevicesStop Switch, Petrol Engine Bandsaw Blade Guard upperInstallation Site INSTALLATIONInstallation UnpackingAssembling the Saw Carriage Setting up the Saw CarriageSaw Carriage INSTALLATIONSaw Carriage Adjustment INSTALLATIONBand Cleaning Tank FIG. INSTALLATIONHandlebars FIG. Petrol Engine Wire adjustmentPropulsion Electric MotorFIG. Bandsaw BladeINSTALLATION FIG. FIG. FIG.Scale FIG INSTALLATIONPetrol FUEL HANDLINGFuel FuellingStopping a Petrol Engine STARTING AND STOPPINGStarting a Cold Petrol Engine Starting a Warm Petrol EngineStopping the Electric Motor Starting the Electric SawmillStarting the Electric Motor STARTING AND STOPPINGSecuring the Log •Boots or shoes fitted with steel toe- caps Calculating the YieldSawing •Hearing protection •Eye protectionStarting the Petrol Engine Starting the Electric MotorSawing Edging Never use a damaged bandsaw blade Setting the Saw MAINTENANCECleaning and inspection Bandsaw BladeMAINTENANCE Saw Setting PliersMAINTENANCE SharpeningBand Wheel Adjustment Drive Belt FIG.MAINTENANCE MAINTENANCE The Saw Unit’s Height AdjustmentChecking the Braking Function RunnersDaily Maintenance MaintenanceMAINTENANCE Weekly MaintenanceWeights TECHNICAL DATABandsaw Blade Cleaning Petrol EngineTECHNICAL DATA Noise LevelsVibration Levels Templates for Dressing the Grinding Disc 38´z+H66¶6R¨TECHNICAL DATA –EnglishNOTES English´z+H66¶6R¨ 114 022004W12