Manuals / Husqvarna / Lawn and Garden / Chainsaw

Husqvarna SMB 70, SMB 70 E manual Starting the Petrol Engine, Starting the Electric Motor, Sawing

Models: SMB 70, SMB 70 E

1 40

Download 40 pages 5.03 Kb

Page 28

Image 28

USE

!WARNING!

Check during sawing that the bandsaw blade does not hit the folding stops or log lock.

!WARNING!

The saw carriage must not be moved backwards while the bandsaw blade is in motion. Otherwise the bandsaw can jump off and cause personal injury.

Starting the Petrol Engine

1. Start the engine. See page 24.

Starting the Electric Motor

1. Start the electric motor. See page 25.

Sawing

2.Move the saw carriage forwards and cut off the sapwood.

3.Remove the sapwood.

4.Loosen the log, turn it 180°, lower the height adjuster (B), and secure the log.

5.Set the required cutting height using the height adjustment crank (B). This determines the width of the board.

6.Set the band guide as close as possible to the log without the log and band guide touching each other. Lock the band guide using its lever.

7.Cut off the sapwood on the other side. See p 2 and 3.

FIG. 49

FIG. 50

28 – English

Page 28

Image 28

Husqvarna SMB 70, SMB 70 E manual Starting the Petrol Engine, Starting the Electric Motor, Sawing

Contents

SMB SMB 70 E Operator´s manualTABLE OF CONTENTS INTRODUCTION Introduction English –Symbols KEY TO SYMBOLSWarning Signs Safety Regulations SAFETY REGULATIONSPersonal Protective Equipment The One-manSawmill Safety Equipment Fuel SafetySafety During Use PersonnelDESCRIPTION One-manSawmill Petrol EngineDESCRIPTION Tools and operator’s manual38.Open ended spanner 13-15mm 39.Open ended spanner 17-19mm 40.Socket spannerOne-manSawmill Electric Motor DESCRIPTIONTools and operator’s manual DESCRIPTION10 – English Height Setting FIG. Carriage FIGFrame FIG. 3 and FIG. DESCRIPTIONCleaning Tank FIG. Handlebars FIG.Band Wheels FIG Bandsaw and Band Guide FIGHeight Adjustment B DESCRIPTION RailsLog Bolsters A Folding Stops CAdjustable Support Feet Rail StopRail Guard DESCRIPTIONSafety Devices Stop Switch, Petrol EngineBand Wheel Guard Bandsaw Blade Guard upperINSTALLATION InstallationInstallation Site UnpackingSetting up the Saw Carriage Saw CarriageAssembling the Saw Carriage INSTALLATIONSaw Carriage Adjustment INSTALLATIONINSTALLATION Band Cleaning Tank FIG.Handlebars FIG. Wire adjustment PropulsionPetrol Engine Electric MotorBandsaw Blade INSTALLATIONFIG. FIG. FIG. FIG.Scale FIG INSTALLATIONFUEL HANDLING FuelPetrol FuellingSTARTING AND STOPPING Starting a Cold Petrol EngineStopping a Petrol Engine Starting a Warm Petrol EngineStarting the Electric Sawmill Starting the Electric MotorStopping the Electric Motor STARTING AND STOPPINGSecuring the Log Calculating the Yield Sawing•Boots or shoes fitted with steel toe- caps •Hearing protection •Eye protectionStarting the Electric Motor Starting the Petrol EngineSawing Edging MAINTENANCE Cleaning and inspectionNever use a damaged bandsaw blade Setting the Saw Bandsaw BladeMAINTENANCE Saw Setting PliersMAINTENANCE SharpeningDrive Belt FIG. Band Wheel AdjustmentMAINTENANCE The Saw Unit’s Height Adjustment Checking the Braking FunctionMAINTENANCE RunnersMaintenance MAINTENANCEDaily Maintenance Weekly MaintenanceTECHNICAL DATA Bandsaw Blade CleaningWeights Petrol EngineNoise Levels TECHNICAL DATAVibration Levels 38´z+H66¶6R¨ TECHNICAL DATATemplates for Dressing the Grinding Disc –EnglishNOTES English114 02 ´z+H66¶6R¨2004W12