Manuals / Husqvarna / Lawn and Garden / Chainsaw

Husqvarna SMB 70, SMB 70 E manual Scale FIG, Installation

Models: SMB 70, SMB 70 E

1 40

Download 40 pages 5.03 Kb

Page 22

Image 22

INSTALLATION

Scale (FIG 37)

Fit the ruler on the bandsaw blade’s upper guard as follows:

1.Insert the ruler through the top of the scale pointer FIG. 37 A. The greatest value on the ruler shall face downwards.

2.Measure the distance between the underside of the bandsaw blade and the log bolster’s upper section FIG. 38 B. NOTE! During this procedure the bandsaw blade should be tensioned and adjusted.

3.Set the scale so that the scale pointer has the same value and can be read on the scale FIG. 37 C.

4.Bolt the scale to the wheel housing FIG. 37 D.

5.Check that the bandsaw blade moves freely over the long and short log supports when the red mark can be read on the scale pointer. FIG. 37 E

FIG. 37

FIG. 38

22 –English

Page 22

Image 22

Husqvarna SMB 70, SMB 70 E manual Scale FIG, Installation

Contents

SMB SMB 70 E Operator´s manualTABLE OF CONTENTS INTRODUCTION Introduction English –Symbols KEY TO SYMBOLSWarning Signs Safety Regulations SAFETY REGULATIONSPersonal Protective Equipment Safety During Use The One-manSawmill Safety EquipmentFuel Safety PersonnelDESCRIPTION One-manSawmill Petrol Engine38.Open ended spanner 13-15mm DESCRIPTIONTools and operator’s manual 39.Open ended spanner 17-19mm 40.Socket spannerOne-manSawmill Electric Motor DESCRIPTIONTools and operator’s manual DESCRIPTION10 – English Frame FIG. 3 and FIG. Height Setting FIG.Carriage FIG DESCRIPTIONBand Wheels FIG Cleaning Tank FIG.Handlebars FIG. Bandsaw and Band Guide FIGLog Bolsters A Height Adjustment BDESCRIPTION Rails Folding Stops CRail Guard Adjustable Support FeetRail Stop DESCRIPTIONBand Wheel Guard Safety DevicesStop Switch, Petrol Engine Bandsaw Blade Guard upperInstallation Site INSTALLATIONInstallation UnpackingAssembling the Saw Carriage Setting up the Saw CarriageSaw Carriage INSTALLATIONSaw Carriage Adjustment INSTALLATIONINSTALLATION Band Cleaning Tank FIG.Handlebars FIG. Petrol Engine Wire adjustmentPropulsion Electric MotorFIG. Bandsaw BladeINSTALLATION FIG. FIG. FIG.Scale FIG INSTALLATIONPetrol FUEL HANDLINGFuel FuellingStopping a Petrol Engine STARTING AND STOPPINGStarting a Cold Petrol Engine Starting a Warm Petrol EngineStopping the Electric Motor Starting the Electric SawmillStarting the Electric Motor STARTING AND STOPPINGSecuring the Log •Boots or shoes fitted with steel toe- caps Calculating the YieldSawing •Hearing protection •Eye protectionStarting the Electric Motor Starting the Petrol EngineSawing Edging Never use a damaged bandsaw blade Setting the Saw MAINTENANCECleaning and inspection Bandsaw BladeMAINTENANCE Saw Setting PliersMAINTENANCE SharpeningDrive Belt FIG. Band Wheel AdjustmentMAINTENANCE MAINTENANCE The Saw Unit’s Height AdjustmentChecking the Braking Function RunnersDaily Maintenance MaintenanceMAINTENANCE Weekly MaintenanceWeights TECHNICAL DATABandsaw Blade Cleaning Petrol EngineNoise Levels TECHNICAL DATAVibration Levels Templates for Dressing the Grinding Disc 38´z+H66¶6R¨TECHNICAL DATA –EnglishNOTES English114 02 ´z+H66¶6R¨2004W12