Husqvarna SMB 70, SMB 70 E manual Technical Data, Noise Levels, Vibration Levels

TECHNICAL DATA

Noise Levels

Equivalent (see note 1) noise intensity at
operator’s ear during sawing, meas-
ured according to relevant international
standards, dB(A)
Petrol engine:	97.2
Electric motor:	95.6
Equivalent (see note 1) noise level
measured according to relevant inter-
national standards, dB(A)
Petrol engine:	112.8
Electric motor:	107.4

Vibration Levels

(See note 2)

Vibration level in the handle, during sawing, according to international standards, m/s2

Petrol engine: Electric motor:

2.2

0.7

Note 1: Equivalent noise level is, according to ISO 7182 and ISO 9207, calculated as the time-weighted

energy total for noise levels under various working conditions with the following time distribution: 1/2 idling, 1/2 full load.

Note 2: Equivalent vibration level is, according to ISO 7505, calculated as the time-weighted energy total

for vibration levels under various working conditions with the following time distribution: 1/2 idling, 1/2 full load.

EC Declaration of Conformity (Only applies to Europe)

Directive 98/37/EC, Annex 2 A.

Lennartsfors Verkstads AB, Lennartsfors 1, SE-672 92 ÅRJÄNG, hereby guarantees that the bandsaws Husqvarna SMB 70 and SMB 70 E, with serial numbers 02 100001 – 02 5200100, meet the standards prescribed in the COUNCIL’S DIRECTIVES:

-of June 22, 1998 ”relating to machinery” 98/37/EC, annex IIA.

-of May 3, 1989 ”relating to electromagnetic compatibility” 89/336/EEC, and applicable supplements.

-of February 19, 1973 ”concerning electrical equipment”, 73/23/EEC

For information regarding noise emissions, see the Technical Data chapter.

The following harmonised standards have been applied: EN292-1, EN 1807:1999, 60204:1

Registered body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out EU type approval in accordance with article 8, section 2c. The EU type approval certificate is numbered 404/02/854.

The supplied bandsaw conforms with the example that underwent EU type approval.

Årjäng February 14, 2002

Lennartsfors Verkstads AB

Örjan Gustafsson, Product Manager

English 37