Husqvarna SMB 70, SMB 70 E manual Introduction

INTRODUCTION

Introduction

This operator’s manual describes in detail how the one-man sawmill is used and maintained and how servicing is to be carried out. It also de- scribes the measures to be taken for maximum safety and how the safety features are designed and function, as well as how they are inspected, maintained, and repaired if necessary.

NOTE! The section dealing with safety must be read and understood by all those who install, use, or repair the sawmill.

The operator’s manual comprises installation, usage, and the different maintenance procedures that can be performed by the operator. More comprehensive servicing or troubleshooting should be performed by the dealer’s service personnel.

The operator’s manual describes all the requisite safety features and should be read and under- stood by the user before the sawmill is assem- bled.

Symbols and warning signs shown on the next page can be found in this operator’s manual and on the one-man sawmill. If a decal on the sawmill has been damaged or is worn, a new warning decal must be applied as soon as possible in order to ensure the greatest possible safety when using the sawmill.

The one-man sawmill shall only be used to cut boards and planks from logs.

The one-man sawmill should be used outdoors and not in enclosed spaces.

English – 3