Manuals / Husqvarna / Lawn and Garden / Chainsaw

Husqvarna SMB 70, SMB 70 E manual Key To Symbols, Warning Signs

Models: SMB 70, SMB 70 E

1 40

Download 40 pages 5.03 Kb

Page 4

Image 4

KEY TO SYMBOLS

Symbols

The symbols below are used in this operator’s manual.

Eye protection and hearing protection should be used.

Boots or work shoes with steel toecaps and non-slip soles should

be worn.

Eye protection should be used.

Protective gloves should be worn.

Switch off the engine by moving the stop switch to the STOP position before carry- ing out any checks or mainte- nance.

Warning Signs

The decal with the symbols below is found on the one-man sawmill.

Eye protection and hearing protection should be used.

Protective gloves should be worn.

Boots or work shoes with steel toecaps and non-slip soles should be worn.

Read this manual carefully and make sure you under- stand it before attempting to use the one-man sawmill.

Exercise caution.

Bandsaw blade tension

Bandsaw blade cleaning on tank

Bandsaw start/stop and brake

Height setting

Arrow for bandsaw blade direction

Danger

4 – English

Page 4

Image 4

Husqvarna SMB 70, SMB 70 E manual Key To Symbols, Warning Signs

Contents

SMB SMB 70 E Operator´s manualTABLE OF CONTENTS INTRODUCTION Introduction English –Symbols KEY TO SYMBOLSWarning Signs Safety Regulations SAFETY REGULATIONSPersonal Protective Equipment The One-manSawmill Safety Equipment Fuel SafetySafety During Use PersonnelDESCRIPTION One-manSawmill Petrol EngineDESCRIPTION Tools and operator’s manual38.Open ended spanner 13-15mm 39.Open ended spanner 17-19mm 40.Socket spannerOne-manSawmill Electric Motor DESCRIPTIONTools and operator’s manual DESCRIPTION10 – English Height Setting FIG. Carriage FIGFrame FIG. 3 and FIG. DESCRIPTIONCleaning Tank FIG. Handlebars FIG.Band Wheels FIG Bandsaw and Band Guide FIGHeight Adjustment B DESCRIPTION RailsLog Bolsters A Folding Stops CAdjustable Support Feet Rail StopRail Guard DESCRIPTIONSafety Devices Stop Switch, Petrol EngineBand Wheel Guard Bandsaw Blade Guard upperINSTALLATION InstallationInstallation Site UnpackingSetting up the Saw Carriage Saw CarriageAssembling the Saw Carriage INSTALLATIONSaw Carriage Adjustment INSTALLATIONINSTALLATION Band Cleaning Tank FIG.Handlebars FIG. Wire adjustment PropulsionPetrol Engine Electric MotorBandsaw Blade INSTALLATIONFIG. FIG. FIG. FIG.Scale FIG INSTALLATIONFUEL HANDLING FuelPetrol FuellingSTARTING AND STOPPING Starting a Cold Petrol EngineStopping a Petrol Engine Starting a Warm Petrol EngineStarting the Electric Sawmill Starting the Electric MotorStopping the Electric Motor STARTING AND STOPPINGSecuring the Log Calculating the Yield Sawing•Boots or shoes fitted with steel toe- caps •Hearing protection •Eye protectionStarting the Electric Motor Starting the Petrol EngineSawing Edging MAINTENANCE Cleaning and inspectionNever use a damaged bandsaw blade Setting the Saw Bandsaw BladeMAINTENANCE Saw Setting PliersMAINTENANCE SharpeningDrive Belt FIG. Band Wheel AdjustmentMAINTENANCE The Saw Unit’s Height Adjustment Checking the Braking FunctionMAINTENANCE RunnersMaintenance MAINTENANCEDaily Maintenance Weekly MaintenanceTECHNICAL DATA Bandsaw Blade CleaningWeights Petrol EngineNoise Levels TECHNICAL DATAVibration Levels 38´z+H66¶6R¨ TECHNICAL DATATemplates for Dressing the Grinding Disc –EnglishNOTES English114 02 ´z+H66¶6R¨2004W12