Manuals / Husqvarna / Lawn and Garden / Chainsaw

Husqvarna SMB 70, SMB 70 E Fuel Handling, Petrol, Fuelling, Fuel Safety, Is highly inflammable

Models: SMB 70, SMB 70 E

1 40

Download 40 pages 5.03 Kb

Page 23

Image 23

FUEL HANDLING

Fuel

Fuel Safety

!WARNING!

The fuel used in the one-man sawmill has the following hazardous properties:

1.The fluid, its vapour, and its exhaust fumes are poison- ous.

2.Can cause skin irritation.

3.Is highly inflammable.

The following are absolutely forbidden when fuelling:

•Smoking.

•To have flames or hot objects in close proximity.

•To have the engine running.

Petrol

Use leaded or unleaded petrol. The lowest recommended octane grade is 90. If you run the engine on a lower octane grade than 90, so- called knocking can occur. This leads to an increased engine temperature, which can result in serious engine damage.

Fuelling

1.Clean around the fuel cap.

2.Open the fuel cap slowly so that any excess pressure is released.

3.Tighten the fuel cap carefully after fuelling.

Clean the fuel tank regularly. The fuel filter should be changed at least once a year. Contamination in the fuel tanks causes malfunction.

FIG. 39

English – 23

Page 23

Image 23

Husqvarna SMB 70, SMB 70 E Fuel Handling, Petrol, Fuelling, Fuel Safety, Can cause skin irritation, Is highly inflammable

Contents

Operator´s manual SMB SMB 70 ETABLE OF CONTENTS English – INTRODUCTION IntroductionWarning Signs KEY TO SYMBOLSSymbols Personal Protective Equipment SAFETY REGULATIONSSafety Regulations Personnel The One-manSawmill Safety EquipmentFuel Safety Safety During UseOne-manSawmill Petrol Engine DESCRIPTION39.Open ended spanner 17-19mm 40.Socket spanner DESCRIPTIONTools and operator’s manual 38.Open ended spanner 13-15mmDESCRIPTION One-manSawmill Electric Motor10 – English DESCRIPTIONTools and operator’s manual DESCRIPTION Height Setting FIG.Carriage FIG Frame FIG. 3 and FIG.Bandsaw and Band Guide FIG Cleaning Tank FIG.Handlebars FIG. Band Wheels FIGFolding Stops C Height Adjustment BDESCRIPTION Rails Log Bolsters ADESCRIPTION Adjustable Support FeetRail Stop Rail GuardBandsaw Blade Guard upper Safety DevicesStop Switch, Petrol Engine Band Wheel GuardUnpacking INSTALLATIONInstallation Installation SiteINSTALLATION Setting up the Saw CarriageSaw Carriage Assembling the Saw CarriageINSTALLATION Saw Carriage AdjustmentHandlebars FIG. Band Cleaning Tank FIG.INSTALLATION Electric Motor Wire adjustmentPropulsion Petrol EngineFIG. FIG. FIG. Bandsaw BladeINSTALLATION FIG.INSTALLATION Scale FIGFuelling FUEL HANDLINGFuel PetrolStarting a Warm Petrol Engine STARTING AND STOPPINGStarting a Cold Petrol Engine Stopping a Petrol EngineSTARTING AND STOPPING Starting the Electric SawmillStarting the Electric Motor Stopping the Electric MotorSecuring the Log •Hearing protection •Eye protection Calculating the YieldSawing •Boots or shoes fitted with steel toe- capsSawing Starting the Petrol EngineStarting the Electric Motor Edging Bandsaw Blade MAINTENANCECleaning and inspection Never use a damaged bandsaw blade Setting the SawSaw Setting Pliers MAINTENANCESharpening MAINTENANCEMAINTENANCE Band Wheel AdjustmentDrive Belt FIG. Runners The Saw Unit’s Height AdjustmentChecking the Braking Function MAINTENANCEWeekly Maintenance MaintenanceMAINTENANCE Daily MaintenancePetrol Engine TECHNICAL DATABandsaw Blade Cleaning WeightsVibration Levels TECHNICAL DATANoise Levels –English 38´z+H66¶6R¨TECHNICAL DATA Templates for Dressing the Grinding DiscEnglish NOTES2004W12 ´z+H66¶6R¨114 02