KEY TO SYMBOLS
Symbols on the machine:
WARNING! Chain saws can be dangerous! Careless or improper use can result in serious or fatal injury to the operator or others.
Please read the operator’s manual carefully and make sure you understand the instructions before using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
•Protective goggles or a visor
Both of the operator′s hands must be used to operate the chain saw.
Never operate a chain saw holding it with one hand only.
Never let the guide bar tip come in contact with any object.
WARNING! Kickback may occur when the nose or tip of the guide bar touches an object, and cause a lightning fast reverse reaction, kicking the guide bar up and towards the operator. May cause serious personal injury.
Recommended cutting equipment in this example: - Bar length 16 inches
-Max. nose radius 9 Teeth
-Chain type Husqvarna H37
Other approved bar and chain combinations in Operator’s Manual.
Measured maximum kickback value | XX |
without triggering the brake, for the bar and |
|
chain combination on the label. |
|
Measured maximum kickback value | XX |
without chain brake for the bar and chain |
|
combination on the label. |
|
Chain brake, activated (right) Chain brake, not activated (left)
Air purge
Refuelling.
Adjustment of the oil pump
Chain oil fill.
Working position.
Choke.
Handle insert size.
Other symbols/decals on the machine refer to special certification requirements for certain markets.
2 – English
