TECHNICAL DATA
Recommended cutting equipment for USA
Following is a list of recommended cutting equipment for Husqvarna chainsaw model T540XP. This chainsaw model equipped with either of the listed bar and saw chain combination(s), fulfills the requirements according to ANSI B175.1- 2000 (Gasoline Powered Chain Saws - Safety Requirements).
The following list is the chain saw manufacturers recommendations. There may be other combinations available, which will also achieve kickback reduction.
Chainsaw model Husqvarna T540XP met the kickback performance requirements of ANSI
Recommended cutting equipment for Canada
Following is a list of recommended cutting equipment for the Husqvarna chainsaw model T540XP. The listed combination(s) of powerhead, bar and saw chain meet all requirements outlined in Canadian Standards Assosiation
Furthermore the saw chain Husqvarna H37 is evaluated and listed as a Type C Low Kickback Saw Chain according to the provisions in
Kickback information
The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the corresponding maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list. For guide bars of the same length, all
Guide bar and saw chain combinations
The following recommended combinations of bar and saw chain are type approved for your chain saw.
|
| Guide bar |
| Saw chain | ||
|
|
|
|
|
|
|
Length, inch | Pitch, inch |
| Gauge, inch | Max. nose radius | Type | Drive link count |
|
|
|
|
|
|
|
12 |
|
|
|
| Husqvarna H37, | 45 |
|
|
|
|
|
| |
14 | 3/8 |
| 0.050 | 9T | 52 | |
| Husqvarna H36 | |||||
|
|
|
|
|
| |
16 |
|
|
|
|
| 56 |
|
|
|
|
|
|
|
Saw chain filing and file gauges
English – 41
