CONTROLS
3. Motion control levers
The machine’s speed and direction are continuously variable using the two motion control levers.
When both controls are in the neutral position, the machine stands still. The controls can be locked in neutral position by the thumb latches.
By releasing both controls an equal amount, the machine moves in a straight line forward.
WARNING!
The machine can turn very rapidly if one motion control lever is moved much further than the other.
In order, for example, to turn right while moving forward, move the right control towards the handle (neutral position). The rotation of the right wheel is reduced and the machine turns to the right.
With the opposite wheel still under power a turn is accomplished. If the motion control lever is squeezed even tighter the brake will be applied to that wheel and a tighter more abrupt turn is accomplished.
4. Operator Presence Lever
Located on the handle. As an additional safety feature, these mowers are equipped with an Operators Presence System. This is an electrical interlock safety system which is activated by depressing either one or both of the Operator Presence Levers towards the handle grips.
Releasing both Operators Presence Levers while mowing or transporting will break the electrical circuit and cause the engine and mower to stop. The mower will not stop immediately after releasing the operate presence levers, some travel does occur.
One or both levers must be pressed against the handle for the engine to remain running, when the blades are engaged or thumb latches are not locked in the motion control levers.
