Husqvarna WG4815P/968999278, WG3613P/968999116 manual Lubrication, Important Information

Models: WG3213P/968999114 WG4815P/968999278 WG3613P/968999116

1 74
Download 74 pages 17.91 Kb
Page 52
Image 52
Manual background

LUBRICATION

5.Engine oil Kawasaki Engine Changing the Engine Oil

The engine oil should be changed for the first time after 8 hours of operation. Thereafter, it should be changed every 100 hours.

WARNING!

Engine oil can be very hot if it is drained directly after stopping the engine. Allow the engine to cool somewhat first.

IMPORTANT INFORMATION

Used engine oil is a health hazard and must not be disposed of on the ground or in nature; it should always be disposed of at a workshop or appropriate disposal location.

Avoid skin contact; wash with soap and water in case of spills.

1.Place the machine on a flat surface.

2.Place a container under the engine where the hose from the oil drain valve exits.

3.Remove the dipstick and open the drain valve.

4.Allow the oil to run out into the container.

5.Then close the oil drain valve.

6.Replace the oil filter if necessary.

7.Fill with new engine oil refer to “Checking the Oil Level” on page 50.

8.Start the engine. Run it for a few seconds and re-check the oil level.

Checking the Oil Level

Check the oil level in the engine when the machine is standing level and the engine is stopped.

Remove the dipstick, wipe it clean, and then replace it.

The dipstick should not be screwed into place.

Take the dipstick out again and read the oil level.

8011-451

Oil drain valve

8011-452

Remove the dipstick

English-50

Page 52
Image 52
Husqvarna WG4815P/968999278, WG3613P/968999116, WG3213P/968999114 manual Lubrication, Important Information