OPERATION
IMPORTANT INFORMATION
Do not let recoil cord snap back by itself. This may damage the cord or the recoil starter assembly.
7.Pull the recoil starter grip slowly until you
feel compression, then pull it briskly.
If the engine won´t start in three pulls, open the choke and try again.
8. Warm engine momentarily, then disengage the choke until engine runs smoothly, approximately 1/2 throttle.
Pull the starter grip
WARNING!
Be sure all persons are clear of area before engaging the blades.
IMPORTANT INFORMATION
To prolong spindle bearing, clutch and belt life engage and disengage blades at approximately ½ throttle.
9.Depress one operator presence lever. Engage the blades and set the desired rpm. The best cutting and bagging is
obtained with engine at top rpm. | Presence lever |
Blade engaged