STORAGE

Storage

Winter Storage

At the end of the mowing season, the machine should be readied for storage (or if it will not be in use for longer than 30 days). Fuel allowed to stand for long periods of time (30 days or more) can leave sticky residues that can plug the carburetor and disrupt engine function.

Fuel stabilizers are an acceptable option to prevent sticky residues during storage. Add stabilizer to the fuel in the tank or in the storage container. Always use the mixing ratios specified by the manufacturer of the stabilizer. Run the engine for at least 10 minutes after adding the stabilizer so that it reaches the carburetor. Do not empty the fuel tank and the carburetor if you have added stabilizer.

WARNING!

Never store an engine with fuel in the tank indoors or in poorly ventilated spaces where fuel vapor can come in contact with open flames, sparks, or a pilot light such as in a boiler, hot water heater, clothes drier, etc. Handle the fuel with care. It is very flammable and careless use can cause serious personal injury and property damage. Drain the fuel into an approved container outdoors and far away from open flame. Never use gasoline for cleaning. Use a degreaser and warm water instead.

To ready the machine for storage, follow these steps:

1.Thoroughly clean the machine, especially under the mower deck. Touch up damage to the paint and spray a thin layer of oil on the underside of the mower deck in order to avoid corrosion.

2.Inspect the machine for worn or damaged parts and tighten any nuts or screws that may have become loose.

3.Change the engine oil; dispose of properly.

4.Empty the fuel tanks or add a fuel stabilizer. Start the engine and allow it to run until even the carburetor is drained of fuel or the stabilizer has reached the carburetor.

5.Remove the spark plugs and pour about a tablespoon of engine oil into each cylinder. Turn over the engine so that the oil is evenly distributed and then refit the spark plugs.

6.Lubricate all grease zerks, joints, and axles.

7.Store the machine in a clean, dry place and cover it for extra protection.

Service

When ordering spare parts, please specify the purchase year, model, type, and serial number.

Always use genuine Husqvarna spare parts.

An annual check-up at an authorized service workshop is a good way to ensure that your machine performs its best the following season.

English-59

Page 60 Page 62
Page 61
Image 61
Husqvarna WG4815P/968999278, WG3613P/968999116, WG3213P/968999114 manual Winter Storage, Service
Page 60 Page 62

WG3213P/968999114, WG4815P/968999278, WG3613P/968999116 specifications

Husqvarna is a renowned name in outdoor power equipment, delivering high-quality products that cater to various gardening and landscaping needs. The Husqvarna WG3613P/968999116, WG4815P/968999278, and WG3213P/968999114 are three standout models from their range, each designed to enhance user experience through innovative features and technologies.

The Husqvarna WG3613P is a powerful 36V cordless garden tool that combines efficiency with versatility. It offers an adjustable cutting width, enabling users to switch between narrow and wide settings for different tasks. Its lightweight design ensures comfort during prolonged use. The WG3613P is powered by a high-performance motor that delivers excellent cutting power, making it suitable for both small gardens and larger landscapes. The tool's ergonomic handles and user-friendly controls ensure seamless operation, allowing users to focus on their gardening tasks without fatigue.

Next in line is the WG4815P, an advanced 48V model that boasts superior power and performance. This model is equipped with an innovative lithium-ion battery that delivers extended run time while reducing charging time. The WG4815P's cutting system is designed for precise and clean cuts, which is essential for maintaining healthy plants and a manicured lawn. Additionally, it features adjustable speed settings, allowing users to tailor the cutting speed to different types of vegetation. The unit’s compact design enhances its maneuverability, making it easy to operate in tight spaces.

Lastly, the WG3213P is a lightweight, compact 32V cordless tool that excels in handling smaller gardens and tasks. Its efficient motor provides ample power for trimming and edging, while its slim design makes it incredibly easy to handle. The WG3213P is equipped with a quick-release feature for effortless blade changes, ensuring that users can maintain their tools with minimal downtime. Furthermore, the model incorporates an automatic line feed system, which simplifies operation and enhances productivity by eliminating the need for manual line adjustments.

All three models—WG3613P, WG4815P, and WG3213P—reflect Husqvarna's commitment to quality and innovation. Their robust designs, cutting-edge technologies, and user-friendly features make them ideal choices for homeowners and professional landscapers alike. Whether tackling dense brush or simply maintaining a tidy garden, these tools provide the power and efficiency needed to achieve outstanding results. With Husqvarna, gardening becomes not just a task, but an enjoyable experience.
Top Page Image Contents