SERVICE AT INTERVALS INDICATED | WEEKLY OR 50 ANNUALLY OF | ||
HOURS | 100 HOURS | ||
| |||
Verify safety start interlock system
Visually inspect unit for loose hardware and/or damaged parts
Visually inspect tires Check oil level, engine (1) Clean air intake screen (4) Clean Foam element (4) Check fuel level
Discharge
Grease front wheel bearings Change engine oil & filter (1) (3) Clean cylinder and head fins (a) Check battery connections Check tire pressure with a gauge Clean engine exterior (a)
Replace air cleaner paper element (4) Clean and
Check pump and deck belt tension & condition (5) Check fuel lines (6)
Tighten lug nuts on wheels (2) Change fuel filter
Replace spark plugs
Check engine valve clearance (a) Service starter (8)(a)
Replace EZT pump belt
NOTES:
Prior to each use
Prior to each use
Prior to each use
Prior to each use or ever 4 hrs. Prior to each use or ever 4 hrs. Prior to each use or ever 4 hrs.
Prior to each use Prior to each use Prior to each use
X
X
X
X
X
X
X
X
X
X
X
X
X
X Every 200 hours or 2 years Every 200 hours or 2 years Every 200 hours or 2 years
1.Initial oil change is after 5 hours of operation. Thereafter, change oil after ever 40 hours. operating. Change more often under dusty or dirty conditions and during hot weather periods.
2.Torque initially and after first 2 hours of operation.
3.Change engine oil filter per the engine manufacturer’s recommendations. Refer to Engine Owner’s Manual for recommendations and other maintenance items.
4.Service more often under dusty or dirty conditions.
5.Pump drive belt
6.Check fuel line hoses, fuel valve and grommet for any cracks or leaks
7.Honda engine only.
8.Kohler engine only.
References:
aRefer to Engine Owner’s Manual
NOTE: After completing Maintenance cycle (100 hours), repeat cycle.
Introduction
Regular maintenance is the best prevention for costly downtime or expensive, premature repair. The fol-
333559 09/08 |
